Meriam M4 Series Precision Calibrator Data Logger Manual Manuel d'utilisateur télécharger pdf (Page 6)

ZM4 Instruction Manual 9R87-B June 2012

Product Overview

Figure 1: M4 Inputs and Outputs

NOTES:

Batteries must be installed for Volts/mA measurement and simulation

operation.

When the unit is attached to a high power USB port, everything except for

the Volts/mA sensor runs from USB power.

Volts/mA measurement or simulation should not be used with USB attached

unless the USB power source is isolated.

Number Name Description

Pressure Manifold

Connection

Connects the calibrator to a pressure

source via 1/8” NPT Female.

M400 = One Pressure Sensor

M402 = Two Pressure Sensors

USB Connection Connects the calibrator to a computer

using a USB Mini Type B to USB

Standard Type A cable.

Measure Volts/mA

Source Volts/mA

Terminals

Terminals for measuring or sourcing

both Volts and mA DC.

50VDC and 100mA max.

Battery/SD Card

Access

4x1.5V AA batteries and SD card for

data logging

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Pas de commentaire

Meriam M4 Series Precision Calibrator Data Logger Manual Manuel d'utilisateur Page 6