Meriam M4 Series Precision Calibrator Data Logger Quick U Manuel d'utilisateur télécharger pdf

Meriam Process Technologies • 10920 Madison Avenue • Cleveland, Ohio 44102 U.S.A.

Phone (216) 281-1100 • Fax (216) 281-0228 • www.meriam.com

Congratulations! The M4 is one of the most capable handheld pressure

calibrators available. Follow the instructions in this quick guide to become

familiar with the unit. See the User’s Manual on the product CD or Meriam

website for detailed operating instructions. Consult the specifications on the back

of this page before use. Thank you for choosing Meriam Process Technologies!

M4 Series

Quick Use Guide

9R121-A Dec, 2010

Task Step by Step Instructions

How do I get started with my M4? Remove the hand strap. Loosen the two screws on the battery cover. Insert

the 4 AA batteries following (+,-) polarity signs. Insert the provided SD™

card in slot next to batteries. Make sure the tab on SD™ card is unlocked.

You will hear a click once installed correctly.

How do I change units of measure? Press the Sensor Key to highlight the sensor. The display

will turn black on the first sensor. The Units Key is now active. Press the

Units Key to scroll through the Engineering units. To confirm selection

press the Left Arrow Key or wait approximately 5 seconds. The screen will

return to Measure mode.

How do I source 24V and measure mA(I)? Press the Sensor Key repeatedly until VI is highlighted. Press the Setup

Key to see details and available operation modes. The Mode selection will

be highlighted. Press the Right Arrow Key or F4 to enter in menu. Place

finger on white wheel with slight pressure and rotate clockwise or counter

clockwise until 24V Source is highlighted. Press the Right Arrow Key or F4

to confirm. Mode will now say “24V Source”. Press Left Arrow Key or F1 to

return to Measure mode. You are now sourcing 24V and Measuring mA.

How do I setup a Data Logging session to Press the Setup Key. Place finger on white wheel with slight

capture readings once a second for pressure and rotate clockwise or counter clockwise until

one minute? Data Logging is highlighted. Press the Right Arrow or F4 Key to confirm.

Place finger on wheel and rotate clockwise until interval is selected.

Press the Right Arrow or F4 Key. Use wheel to change value to 1 sec.

Press Save and then Exit. Use wheel to highlight duration. Press the Right

Arrow or F4 Key. Use wheel to highlight 1 minute. Press the Right Arrow

or F4 Key to confirm. Use wheel to highlight start. Press the Right Arrow or

F4 Key to confirm. REC will appear in left hand corner of the screen. When

test is complete it will disappear. Results can be downloaded using USB

cable and software utility provided on the product CD.

Quick Key and Screen Guide (M400 and M402)

P1:Pressure Sensor #1, P2: Pressure Sensor #2

VI: Volts & Current Sensor

Soft Keys (F1-F4)

Navigation Wheel

Left & Right Arrow

▲▲

Standard Banana Jacks

1/8” FNPT Pressure Port(s)

▼▼

1 2

M4 Series SPECIFICATIONS 2

Résumé du contenu

Page 1

Meriam Process Technologies • 10920 Madison Avenue • Cleveland, Ohio 44102 U.S.A. Phone (216)

Page 2 - M4 Series SPECIFICATIONS

Meriam Process Technologies • 10920 Madison Avenue • Cleveland, Ohio 44102 U.S.A. Phone (216)

Commentaires sur ces manuels

Pas de commentaire

Meriam M4 Series Precision Calibrator Data Logger Quick U Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Meriam M4 Series Precision Calibrator Data Logger Quick U. Meriam M4 Series Precision Calibrator Data Logger Quick Use Guide User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Meriam M4 Series Precision Calibrator Data Logger Quick U